This slightly used Alternate Light Source was used for classroom instruction and student exercises and is in excellent condition. It has a LED lifetime of 20,000 hours but was used for less than five hours.
Crime scene investigation where a smooth beam blue light source is required
Engineered smooth beam ensures excellent observational and photographic results
Powerful enough to excite many fluids and fibers
Reliable regulated solid-state blue emission from 4x3 Watt light source
Low/High/White selectable modes.
Narrow band 455nm emission, ideal for numerous crime scene applications
Current regulated circuity maintains constant LED output
Powered by two 18650 rechargeable lithium cells (included)
Thumb switch select modes
5.25" long x 2.25" in diameter
Runtime 2 hours on high power mode with dual 2600mAhr cells
LED lifetime 20,000 hours
Center intensity exceeds 10,000uW/cm(2) at 12" working distance
Kit includes custom case, two orange barrier filter goggles
Kit also includes one 8" x 8" orange barrier filter and one 6" fluorescent scale for photography
This 1 3/8 inch wide Split-Back Tamper Evident Evidence Tape comes in a hard plastic case where you pull out the length of tamper evident tape you'll need, then tear. Simply remove half of the protective backing with the split-back design and apply. It is that easy!
Virtually impossible to remove, this evidence tape will shred, rip or stain the surface to indicate even the slightest signs of tampering. Meets all security requirements for sealing evidence packages by your Local, State or federal Crime Laboratory. Truly a staple item for evidence units and crime labs.
When control of an area is a priority, establish and maintain security by creating perimeters quickly and efficiently with this crime scene barrier tape. Eye-catching black "CRIME SCENE DO NOT CROSS" lettering is printed on brilliant yellow 3" wide polyethylene barrier tape.
These slightly used evidence tent markers were used for classroom instruction and student exercises and are in excellent condition. These 3" A-Frame Evidence Tent Markers are ideal for use at crime scenes and accident scenes, the plastic, one-piece, stackable design is lightweight and cost efficient. A-Frame Tent Evidence Markers are perfect for marking crime scene evidence. Numbered 1 through 50.
These 3" A-Frame Evidence Tent Markers are ideal for use at crime scenes., The plastic, one-piece, stackable design is lightweight and cost efficient. A-Frame Tent Evidence Markers are perfect for marking crime scene evidence. Lettered A through Z. New stock.
These 3" A-Frame Evidence Tent Markers are ideal for use at crime scenes and accident scenes, the plastic, one-piece, stackable design is lightweight and cost efficient. A-Frame Tent Evidence Markers are perfect for marking crime scene evidence. Markers are numbered 16 through 50. New stock.
These 5cm x 5cm L-shaped ABFO style scales are perfect for all areas of forensic science photography. An L-shaped scale allows for correct perspective documentation of the evidence, preventing distortion of the image. Printed on rigid plastic with a matte finish. Perfect for photography in most lighting conditions. White scale includes photo gray imprint.
This scale was designed primarily for footwear and tire track impression photography. It provides accurate measurements when placed evenly in the same plane in two-dimensional or three-dimensional impressions. Excellent for verifying perspective distortion. The rigid plastic scale has a flat, non-reflective finish to eliminate reflections during photography. The L-shaped scale measures 30cm x 15cm. The reversible scale is white with black printing, and the reverse side is black with white printing.
This set of bendable plastic scales includes four different scale faces printed on three sticks. Two of the the sticks are made to show measurements to 36" horizontally from left to right with a standard three foot vertical scale on the rear. The third stick has on one side with right to left reading horizontal 36" scale (for use in situations where you need to show measurements out from a surface on your right) and on the other side of the stick reading vertically from 37" to 72." This allows you to couple it with one of the other sticks (using the included clip) to show a six foot vertical measurement.
This 8½” by 11" template includes furniture and plumbing cutouts in two convenient scales. The ¼ inch equals one foot scale produces detailed scale drawings when drawn with a medium ball point pen. The template is useful for drawing burglary diagrams as well as more serious crime scenes, including homicide. The second scale is one inch equals 10 feet. Scale rulers for both scales are included.
This notebook-sized template has holes to fit a three ring binder. The Crime Scene Template is machined in the USA from the finest material available.
This 8½” by 11" template includes human human figure cutouts in ¼ inch equals one foot scale to produce detailed scale drawings when drawn with a medium ball point pen. The template is useful for drawing homicide crime scene diagrams as well as suicide and other cases involving a human figure. Male figures from 4'6" to 6'6" tall and female figures from 4'6" to 6'3" are included. A scale ruler is included.
This notebook-sized template has holes to fit a three ring binder. The Human Figure Template is machined in the USA from the finest material available.
These Fiberglass Filament Fingerprint Brushes have super fine bristles for soft brushing action.
These brushes were lightly used by students in a fingerprinting class. These brushes are just broken in with a bit of black fingerprint powder and are ready for additional use. These brushes actually perform best after being broken in.
Noted for its coal-black hue and property of adhering to the latent print, but not to the background surface, Lightning® Black Powder has been used by latent print examiners and crime scene technicians for over 70 years. Lightning® Black Powder is recommended for most general dusting situations with either a fiberglass filament brush or a camelhair brush.
Use Lift Backing Cards to mount your lifts. Complete with all documentation and crime scene sketch areas, the cards are printed on extra heavy 8-point stock and feature a glossy white side for mounting your lifts.
Pack of 25 cards. (Also available in packs of 50 and 100)
Sirchie's HI-FI Volcano silver/black latent print powder is a two-color powder that will contrast with any color surface. This unique formulation will develop black on light-colored surfaces and silver on dark-colored surfaces. All lifted prints dusted with this powder may be mounted on white backing cards for contrast.
These magnetic applicators were used by students in a fingerprinting course and are in excellent condition.
The use of a magnetic applicator permits the user to develop latent prints on any non-ferrous surface without the risk of latent print ridge destruction because the magnetic powder forms the brush. Therefore, excessive force during the application of powder is eliminated. One main advantage of this system is that it is easy to clear surfaces of excess powder, offering maximum photographic effectiveness, and the same magnetic powder can be reused again and again.
Similar in tone to standard black latent print powder, Black Magnetic Powder is recommended for use with a magnetic applicator in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber.
Works exceptionally well on plastic baggies after they have been treated with cyanoacrylate esters (superglue fumes)
Packaged in wide-mouth jars for easy access with a magnetic applicator
Made of a lab model stone-type III casting material of superior quality, Copy Cast Casting material gives easy mix and pour convenience. It also does not require any reinforcement material and, in most cases, a casting form will not be necessary. Comes in a one-gallon plastic reseal bag with 2 lbs. of casting material.
Directions: Add 8 ounces of water to powder and reseal. Kneed until smooth. Pour slowly into impression.
by Gary W. Jones ISBN 0-9661970-3-8 Introduction to Fingerprint Comparison was written by retired FBI Supervisory Fingerprint Specialist Gary W. Jones. This 87 page 5½" by 8½" book is a valuable text in learning the basic skills in fingerprint comparison. Examples and quizzes give the reader a solid foundation on which to build comparison skills.
by Gary W. Jones ISBN 978-1-933373-03-4 Courtroom Testimony for the Fingerprint Expert was written by retired FBI Supervisory Fingerprint Specialist Gary W. Jones. This 114 page 5½" by 8½" book is a valuable text in preparing to testify as an expert witness in court. You will refer to this text over and over to become more effective as an expert witness.
by Steven Staggs ISBN 978-1-933373-07-2 Crime Scene and Evidence Photography, 2nd Edition is designed for those responsible for photography at the crime scene and in the laboratory. It may be used by law enforcement officers, investigators, crime scene technicians, and forensic scientists. It contains instructions for photographing a variety of crime scenes and various types of evidence. It is a valuable reference tool when combined with training and experience. Crime Scene and Evidence Photography is also a helpful resource for students and others interested in entering into the field of crime scene investigation.
by Richard Behr ISBN 978-1-933373-08-9 (eBook version) ISBN 978-1-933373-09-6 (PDF version) This updated edition of Richard Behr's Under the Headset: Surviving Dispatcher Stress is a book about the stress of being a dispatcher. Written by a dispatcher and a critical incident stress instructor, it includes information about the stress process, identifying stressors, and coping with stress. The book also includes sections on humor and inspiration. Stories of survival, written by dispatchers who have lived through the stress of critical incidents, are provided.